• 手机版

    微信扫一扫
    使用手机版查看

    纸引百科-手机版首页
  • 公众号

    微信扫描关注
    纸引未来网公众号

    纸引百科-订阅号
  • 纸引未来网纸张产业链大数据平台-客服QQ客服
    客服QQ:1708923858
    客服QQ:3620323674
    客服QQ:401369780
    客服电话:020-82025252
积分商城
纸引未来网
纸引未来网-纸引汇采小程序

纸引汇采

微信扫码登录
纸引汇采小程序

纸引未来网-纸引汇采小程序
纸引行情-小程序

关注官方小程序

微信扫码登录
纸引行情小程序

纸引行情-小程序
 
当前位置: 首页 » 产业商城 » 印刷 » 印刷油墨 » 丝印油墨 »

丝印电镀油墨,电镀丝印油墨,电镀油墨

价格

起批量

¥214.00

1-10件

¥195.00

11-31件

¥131.00

31件以上

到付: 支持货到付款
品牌: 欧莱斯
成交/评价: 0 条评论 11179 人关注
更新: 2017-01-20
配送至: 选择收货地区
  • 请选择
数量:
件 (库存充足
立即购买   加入购物车
公司基本资料信息






 
 
    75电镀强化系列油墨 油墨特性:主要用于电镀表面、强化表面、真空电镀表面.PU表面.UV表面等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 . 75 electroplating to strengthen series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.
 
更多»同类商品

[ 商品搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 违规举报 ]  [ 关闭窗口 ]

 
纸引未来网1 纸引未来网